|
|
|
Foghet
| Caldea | Wood-burning heating stoves for water heating |
 |
 |
 |
|
 |
|
|
|
 |
Caldea Model Lusso |
|
 |
|
| The heating stove with three functions |
The Caldea heating stove combines the advantages of the fireplace, boiler and stove: in fact, it is a complete heating system with high efficiency of 82.30% and controlled and prolonged combustion, that can heat with just wood, an entire home of 60 to 130-200-300 m2, and several floors,by means of radiators, floor or other systems, and produce domestic hot water for all the family.
It can also work in parallel with other heat sources (gas-fired boiler, solar panels, thermal cells). To ensure a warm home even when the wood finishes, Caldea can be combined with another boiler (e.g. gas, oil, etc.) which, managed by the room thermostat or a chronothermostat, allows the required temperature to be maintained at any time of the day.
It comes with all the plumbing kit with closed vessel already assembled and tested, immediately ready for installation, and 2 cooling exchangers (compulsory)that ensure operation even in case of a power failure.
Caldea is equipped with CaldoControl, an exclusive automatic combustion control device that regulates wood consumption according to heat requirements. This increases the burn time of the stove, which can operate with just 3 big loads a day.
It is also equipped with an oven in handworked terracotta, that also works electrically with the stove off (except the Caldea Caldaia model). Caldea comes the versions: Base, Lusso, Caldaia and Camino.
The Base and Lusso versions are available with a wide choice of claddings, whereas the Caldaia model comes with painted steel cladding. Caldea is an approved and certified product.
|
|
|
|
|
 |
| |
Caldea Base |
|
Caldea Lusso |
|
Caldea Caldaia |
|
Caldea Camino |
|
| |
|
|
| |
|
technical characteristics |
|
|
|
|
| |
|
- Combustion chamber
Heat exchanger in special steel with shaped double wall, treated internally, insulated with rock wool. Sturdy, designed to last and for fully exploiting the heat, obtaining high efficiencies.
- Corrugated exchange surface
The patented design of the inner surface triples exposure to the fire and therefore increases efficiency.
- Supplied complete
It comes complete: with the plumbing kit with closed vessel, already assembled and tested, with 2 cooling exchangers (compulsory, that ensure operation even in case of a power failure), control panel with electronic controller and various devices, CaldoControl device (which regulates wood combustion according to the temperature), terracotta oven, door with ceramic glass, ash pan.
- Plumbing Kit
With or without domestic hot water production, with closed vessel and cooling exchangers. The kit is assembled and tested, complete with safety valves, heating pump, plate-type exchanger for production of domestic hot water, expansion tank (closed), filling unit, anticondensation and valves.
- Caldo control
The Caldea wood-burning model is equipped with CaldoControl, an exclusive automatic combustion control device that regulates wood consumption according to heat requirements.
- Copripiastra
The Lusso model comes with an elegant plate cover, for hiding the hotplate when necessary.
|
|
|
|
|
| |
|
|
| |
|
|
 |
|
| |
Caldea Wood Base |
|
| |
|
|
 |
Burnt power |
31,72 KW |
| Nominal heat output |
26,8 KW |
| Efficiency |
84.7% |
| Heatable area* |
130-200-300 m2 |
|
 |
*depending of the typology of construction and isolation of the building |
| |
|
| Max. power delivered to fluid |
22,8 KW |
| Test pressure |
4,5 bar |
| Max. working pressure |
2 bar |
| Fume exhaust ø |
150 mm |
| Water content |
35 lt |
| Weight Caldea disassembled |
140 Kg |
| Weight Caldea complete |
427 Kg |
| Weight Caldea lusso disassembled |
140 Kg |
| Weight Caldea lusso complete |
427 Kg |
| DHW flowrate ΔT 40°C |
7 lt/m |
| Oven electric coil absorption |
1500 W |
| Exchange area |
2,57 m2 |
| Rated voltage/frequency |
230/50 V/Hz |
|
| |
|
 |
|
| |
Caldea Wood Lusso |
|
| |
|
|
|
Burnt power |
31.72 KW |
| Nominal heat output |
26.8 KW |
| Efficiency |
84.7 % |
| Heatable area* |
130-200-300 m2 |
|
|
*depending of the typology of construction and isolation of the building |
| |
|
| Max. power delivered to fluid |
22.8 KW |
| Test pressure |
4.5 bar |
| Max. working pressure |
2 bar |
| Fume exhaust ø |
150 mm |
| Water content |
35 l |
| Weight Caldea disassembled |
140 Kg |
| Weight Caldea complete |
427 Kg |
| Weight Caldea lusso disassembled |
140 Kg |
| Weight Caldea lusso complete |
427 Kg |
| DHW flowrate ΔT 40°C |
7 l/m |
| Oven electric coil absorption |
1500 W |
| Exchange area |
2.57 m2 |
| Rated voltage/frequency |
230/50 V/Hz |
|
 |
|
| |
Caldea Wood Caldaia |
|
| |
|
|
|
Burnt power |
31.72 KW |
| Nominal heat output |
26.8 KW |
| Efficiency |
84.7% |
| Heatable area* |
130-200-300 m2 |
|
|
*depending of the typology of construction and isolation of the building |
| |
|
| Max. power delivered to fluid |
22.85 KW |
| Test pressure |
4.5 bar |
| Max. working pressure |
2 bar |
| Fume exhaust ø |
150 mm |
| Water content |
35 l |
| Weight Caldea disassembled |
140 Kg |
| Weight Caldea complete |
427 Kg |
| Weight Caldea lusso disassembled |
140 Kg |
| Weight Caldea lusso complete |
427 Kg |
| DHW flowrate ΔT 40°C |
7 l/m |
| Oven electric coil absorption |
1500 W |
| Exchange area |
2.57 m2 |
| Rated voltage/frequency |
230/50 V/Hz |
|
|
|
| |
Caldea Wood Camino |
|
| |
|
|
|
Burnt power |
31.72 KW |
| Nominal heat output |
26.8 KW |
| Efficiency |
84.7% |
| Heatable area* |
130-200-300 m2 |
|
|
*depending of the typology of construction and isolation of the building |
| |
|
| Max. power delivered to fluid |
22,85 KW |
| Test pressure |
4.5 bar |
| Max. working pressure |
2 bar |
| Fume exhaust ø |
150 mm |
| Water content |
35 l |
| Weight Caldea disassembled |
140 Kg |
| Weight Caldea complete |
427 Kg |
| Weight Caldea lusso disassembled |
140 Kg |
| Weight Caldea lusso complete |
427 Kg |
| DHW flowrate ΔT 40°C |
7 l/m |
| Oven electric coil absorption |
1500 W |
| Exchange area |
2.57 m2 |
| Rated voltage/frequency |
230/50 V/Hz |
|
|
|
|
| |
|
|
|
 |
|
- Savings on fuel costs:
Using wood offers a saving of 60% (*) on the cost of gas heating, thanks to an efficiency of 82.30%, thus enabling the product to quickly pay for itself.
- Kitchen flavours:
While heating the home with the wood fire you can cook in the hand made terracotta oven, on the cast iron hotplate, or prepare tasty grilled dishes and rediscover the flavours of a healthy and economical cuisine.
- Autonomy also with central heating:
If the gas-fired boiler (or other combined source) fails, Caldea will continue to work, thus ensuring the comfort of an always warm house.
- Technological heating stove:
Thanks to Jolly-Mec technology, Caldea can be integrated at any time even with other sources of alternative energy and always be abreast of new systems that offer savings.
- Simple installation:
Caldea comes preassembled. Installation is quick and easy, without requiring masonry work. With the plumbing kit already assembled, the installer is relieved of responsibility.
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
